Description

“MICRO” Paddle Type MPC Series flow controllers are specifically designed for use on liquid lines such as water, ethylene glycol or any other fluid which is not harmful to brass and which is not classified as a hazardous fluid. These flow controllers can be mounted on horizontal or vertical pipeline but must be located in section of pipe where there is a straight run of at least 5d (d – Diameter of Pipe) on each side of the switch. Technical Specifications: Enclosure – Engineering Plastic Ingress Protection – IP-55 Paddle Material – SS 304 supplied in 5 piece packages in size of 1”, 2”, 3” 5” & 6” for Paddles only Paddle Link – Brass Bellow Material – Phosphorus Bronze Base Cover – Mild Steel Max. Pressure – 10 Bar (150 PSI) Operating Temperature – Ambient : 0 … 600C Process : 0 … 1000C Pipe Connection – SS 1/2” BSP (Female) for ‘T’ Type ABS 1” NPT (Male) for Paddle Standard / SS (Optional) Set Point – Adjustable on site. Screw provided under top cover Bellow Life – 500000 cycles Switch action – SPDT snap action Electrical rating – 250 V AC, 15 (7.5) Amp, 50/60 Hz Conduit Entry – 22 mm diameter hole for 1/2” conduit Flow range & Unit – 10 … 628 LPM m3/hr, US GPM units available Features – As a safety device against control device failure Do not require center adjustment Save a lot of installation time No leakage problem No welding or adaptor required